Teknomer 600 1K Bitumen Waterproofing Material

Product description
It is a one-component, ready-to-use, liquid applied, bitumen-polyurethane based waterproofing material with improved quality, which maintains its permanent elastic structure, and cures by reacting with the humidity in the air.

Usage areas
• In terraces, roofs, balconies and creek gutters,
• In wet areas under tiles, flower beds,
• In foundation and foundation curtain walls,
• Against water and corrosion in concrete structures,
• On building exteriors,
• It can be used safely against water in wood and sheet metal applications. Pre-testing is recommended.

Features and Advantages
• It has crack bridging feature.
• It maintains its elasticity even at low temperatures.
• Easy to apply (with roller or brush).
• It has excellent adherence properties even on difficult surfaces.
• It can be applied without a joint.
• The deposit is water resistant.
• It has high frost resistance.
• Maintains its properties at (-)30°C / (+)70°C.

Application Instructions
Surface Quality: The surfaces must be clean, smooth, solid, free of all kinds of dust, oil, dirt, rust, mold oil, detergent, etc. If there is segregation in the concrete, damaged and loose parts should be discarded and weak pieces should be removed. If there are cracks or cavities on the floor or wall where the application will be made, they should be repaired with appropriate TEKNOREP repair mortars.

Surface Preparation: Before applying Teknomer 600 1K Bitumen, if there is dilatation of the structure, first of all, the dilatation must be insulated using Teknomer Chamfer Tapes and Teknomer 400 D. Later, the insulation of dilatations is more difficult and costly. All drains and gutters, strainers should be insulated using chamfer tapes. The surface to be insulated must be dry . If there is a puddle or ponding, it should be removed. As a primer on the concrete surface, two-component, epoxy-based Teknobond 300 should be applied with a brush or roller at a rate of 0.200 - 0.400 kg/m2. Primer consumption varies according to the quality and absorbency of the concrete. It should be ensured that the primer is completely cured and hardened. Minimum 4 hours, maximum 48 hours should be waited for waterproofing to be done on it.

Surface and Ambient Temperature: (+)5 °C - (+)35 °C

Mixing: Teknomer 600 1K Bitumen is mixed in a clean container free of all kinds of non-adhesive substances or in its own container.

Application Method/Equipment: The product, which has been mixed and ready for application, is applied to the surface with a stiff bristle brush or spraying machines. After the material completes its reaction, the second layer is applied in the vertical direction of the first layer application. Waiting time between coats is at least 1 hour. After the application of the first layer, when there is no trace on the fingers in the manual control, other layers can be passed. If desired, carrier glass fiber can be used as reinforcement between floors.

Since the product does not have UV resistance, heat insulation boards, protection boards, geotextile felt, etc. must be applied after the application. should be covered with

Consumption: 1.20 - 1.50kg/m2, depending on surface condition and workmanship

Cleaning: After application, it should be protected against adverse weather conditions such as direct sunlight, strong wind, high air temperature (over +35°C), rain and frost. Before the product is fully cured, hands should be cleaned with water and detergent.

Cleaning of Equipment: Equipment should be cleaned with Tekno Thinner immediately after the application, before it hardens. After the product hardens, it should be cleaned by mechanical methods.

Potlife: Approximately 1 hour at 20 °C

Cleaning Time: Approximately 1 hour at 20 °C

Packaging: 20 kg. tin of tin

Storage Conditions / Shelf life: 12 months from the date of production in its unopened and undamaged original packaging.

Application Notes / Limitations
• Foreign materials should not be added.
• It should be applied in two layers.
• It should not be applied in the rain.
• The product should not be diluted with water.
• Rain, etc., until the newly applied material completes its hardening. must be protected against weather conditions.