Teknosil Water Repellent Insulation Material

Product description
It is a siloxane-based, transparent material that impregnates the surfaces of building elements and impregnates them with water-repellent properties.

Usage areas
• In exterior cladding,
• On vertical surfaces,
• On less absorbent surfaces such as concrete, marble, granite, slate,
• On absorbent surfaces such as brick, colored briquette, gas concrete, travertine, limestone,
• It is used to protect historical artifacts against atmospheric effects.

Features and Advantages
• It is a colorless, transparent impregnation material with high penetration.
• It provides protection without changing the appearance of exterior cladding and without forming a film layer.
• It reduces the negative effects of the atmosphere by making the surfaces of the building elements impermeable.
• Resistant to alkalis and UV rays.
• It is vapor permeable.
• By keeping the building elements dry, it reduces heat losses and heating costs.
• Contains solvent.

Application Instructions
The surfaces must be clean, smooth, solid, free from all kinds of dust, oil, dirt, rust, mold oil, detergent, etc. If there is segregation in the concrete, damaged and loose parts should be discarded and weak pieces should be removed. If there are cracks or cavities on the floor or wall where the application will be made, they should be repaired with appropriate TEKNOREP repair mortars. TEKNOSİL application should be started after 3-4 days. The surface on which TEKNOSIL will be applied must be dry.

It is ready to use, absolutely no foreign matter should be added.

For maximum penetration in first coat applications, it should be applied to dry surfaces with a suitable roller, brush or spray machine. After approximately 4 hours, the second layer should be applied. For maximum protection, it may be necessary to apply one more coat on very porous surfaces.

After the application, it should be protected against adverse weather conditions such as direct sunlight, strong wind, high air temperature (over +35°C), rain and frost. Before the product is fully cured, hands should be cleaned with water and detergent.
Equipment should be cleaned with TEKNO THINNER right after the application, before it hardens. After the product hardens, it should be cleaned by mechanical methods.

Application Notes / Limitations
• Comply with work safety precautions. Use gloves, masks and goggles while using the product.
• Avoid contact with skin and eyes. Otherwise, consult a doctor.
• Do not apply to PVC and metal surfaces.
• Do not add water or foreign substances in the mixture.