Teknomer Waterproofing Membrane

Product description
Waterproofing membrane/cover for indoor wet area applications.

Usage areas
• It is suitable for indoor/residence applications, wet area (bathroom, balcony, terrace, roof, etc.) floor and wall applications, expansion joints and other joint insulation.
• Outdoor/Commercial areas.

Application Instructions
• Before the application, the floor/wall to be applied must be solid, free of carrier, dust, dirt and separating materials such as oil, grease, rust and paraffin.
• The waterproofing membrane/cover is cut to a size that will completely cover the floor/wall and provide insulation.
• Ceramic adhesive (C2 class Flex adhesive) is prepared according to the manufacturer's instructions.
• It is recommended to use a 4 mm x 4 mm tooth comb for the application of the adhesive. (For exterior / commercial membrane applications, a 6 x 6 mm comb should be used for ceramic adhesive application.)
• The insulation membrane/cover is easily laid on the tile adhesive on the wall and floor and applied. For ease of application, top-down application is recommended on walls.
• In indoor and residential applications, the membrane/covers can be applied by overlapping. The system is locked by applying it with liquid membrane or sealing materials in the overlap areas (at least 5 cm).
• After the membrane/cover is placed on the surface, the excess ceramic adhesive, air bubbles and potholes under it are smoothed out with a flat trowel.
• In the insulation application of outdoor and public places, the membranes should be added end to end and the application should be made. (No overlapping should be done.)
• After the membrane/cover is placed on the surface, the excess ceramic adhesive, air bubbles and potholes under it are smoothed out with a flat trowel.
• After the end-to-end membrane applications, waterproofing tape should be applied at the junction points of the membranes.
• Immediately after the waterproofing membrane/cover application, ceramic adhesive can be applied on the membrane and ceramic coating can be started.
• After the ceramic application, the wall and floor joints are filled with suitable sealing material.