Teknosteel Polyurethane Based, UV Resistant Waterproofing

Product description
It is a water-based, high-performance, single-component, transparent, UV-resistant, ready-to-use, polyurethane waterproofing and coating material modified with special polymers.

Usage areas
• On terraces, roofs and balconies,
• On ceramic and tile surfaces,
• Against water and corrosion in concrete structures,
• On building exteriors,
• It can be used safely against water in aluminum and sheet type applications.

Features and Advantages
• It has high adhesion property.
• High UV resistance.
• Provides excellent adhesion even on glossy surfaces (metal, sheet metal, ceramics, etc.).
• It maintains its elasticity even at low temperatures.
• Easily applied with a roller.
• It has excellent adherence properties even on difficult surfaces.
• It can be applied without a joint.
• The deposit is water resistant.
• It has high frost resistance.
• Maintains its properties at (-)30°C/(+)80°C.

Application Instructions
Surface Quality: The surfaces must be clean, smooth, solid, free of all kinds of dust, oil, dirt, rust, mold oil, detergent, etc. If there is segregation in the concrete, damaged and loose parts should be discarded and weak pieces should be removed. If there are cracks or cavities on the floor or wall where the application will be made, they should be repaired. TEKNOSTEEL application should be started after 3-4 days.

Surface Preparation: All drains, gutters, strainers should be insulated using chamfer tapes. The surface to be insulated must be dry. If there is a puddle or ponding, it should be removed.

Mixing: The product is ready to use, it can be applied directly with a roller. The ready-to-apply product is applied to the surface with a roller. Waiting time between coats is 1 hour. your first floor
After the application, when there is no trace on the fingers in the manual control, other layers can be passed. It is recommended to apply in 2 layers.

Consumption: 0.30-0.50 kg/m² depending on surface condition and workmanship

Cleaning: Before the product is fully cured, hands should be cleaned with water and detergent.

Application Notes / Limitations
• Foreign materials should not be added.
• It is recommended to be applied in two layers.
• It should not be applied in the rain.
• The product should not be diluted with water.
• Rain, etc., until the newly applied material completes its hardening. must be protected against weather conditions.